SIOM OpenIR  > 高功率激光物理国家实验室
Numerical simulation analysis of high efficient SFG and color separation in far field in high power laser facility based on noncollinear phase matching by KDP crystal
Liu C(刘崇); Ji LL(季来林); Zhu BQ(朱宝强); Lin ZQ(林尊琪); jsycjll@siom.ac.cn
2016
发表期刊物理学报
卷号65期号:14
摘要Asymmetric property of wedge lens in 3 omega optical path which is used as frequency separation, and focusing element is considered to be an unfavourable factor for target alignment in inertial confinement fusion (ICF). Furthermore, the thickness of wedge lens in 3 omega optical path will lead to laser induced damage inevitably. For the purpose of scheme improvement of final optical assembly, types I and II noncollinear sum frequency generation in KDP crystal at room temperature are discussed based on nonlinear coupled wave theory. As illustrated by simulated result, in addition to type II collinear SFG used in ICF recently, 351 nm (3 omega) waves can be generated by type I or II noncollinear SFG process. This method can realize color separations of omega, 2 omega, 3 omega in far field without asymmetric element such as wedge lens and posses adequate tolerance of matching angle corresponding to the high efficiency conversion. As calculated, for type I SFG, when the noncollinear angle alpha is in the interval from 0 degrees to 19.99 degrees, phase matching condition can be satisfied in KDP crystal. The noncritical phase matching angle theta(3) is 90 degrees and the corresponding noncollinear angle alpha is about 19.99 degrees. The tolerance of mismatching angle is about +/- 20 mrad. For type II SFG, the noncollinear angle interval that can satisfy phase matching process is about 0 degrees-13.55 degrees. Like type I SFG, there is also an noncritical solution in type II process whose matching angle is about theta(3 omega) = 86.53 degrees. Because of the smaller effective nonlinear coefficient in this case, high efficiency conversion needs about 5 cm thick SFG crystal under 1 GW/cm(2). Correspondingly, tolerance of mismatching angle is about +/- 20 mrad. Because of the harsh tolerance of noncollinear angle between omega and 2 omega and for the purpose of compactness of final optical assembly, another method of noncollinear SFG is proposed: a piece of silica wedge with 12 degrees wedged angle is mounted behind the SHG crystal in order to produce a 3.5 mrad intersection angle between ! and 2 omega, and after type II noncollinear SFG process, omega, 2 omega, 3 omega will be frequency separated in far field automatically by using thin lens. The tolerance of incident angle corresponding to high efficient conversion is about +/- 1.0 mrad. This scheme can improve the the final optical assembly used recently.
文章类型Article
其他摘要为满足高功率激光装置对终端光学系统的改进要求, 控制3omega光路透射元件厚度以降低激光损伤风险, 避免3omega非对称聚焦与色分离元件对靶场调靶产生不利影响, 本文利用非共线相位匹配原理讨论了KDP晶体I类和II类两种和频产生351 nm(3omega)激光及其远场色分离过程. 模拟结果表明, 室温20 ℃环境中除目前常用的共线和频外, 1053 nm(omega)与526.5 nm(2omega)激光可选择I类或II类两种非共线和频方式实现高效3omega激光输出并在激光远场实现色分离, 且具有足
部门归属联合
DOI10.7498/aps.65.144202
收录类别SCI
WOS记录号WOS:000381645900016
引用统计
文献类型期刊论文
条目标识符http://ir.siom.ac.cn/handle/181231/27975
专题高功率激光物理国家实验室
通讯作者jsycjll@siom.ac.cn
作者单位中国科学院上海光学精密机械研究所
推荐引用方式
GB/T 7714
Liu C,Ji LL,Zhu BQ,et al. Numerical simulation analysis of high efficient SFG and color separation in far field in high power laser facility based on noncollinear phase matching by KDP crystal[J]. 物理学报,2016,65(14).
APA 刘崇,季来林,朱宝强,林尊琪,&jsycjll@siom.ac.cn.(2016).Numerical simulation analysis of high efficient SFG and color separation in far field in high power laser facility based on noncollinear phase matching by KDP crystal.物理学报,65(14).
MLA 刘崇,et al."Numerical simulation analysis of high efficient SFG and color separation in far field in high power laser facility based on noncollinear phase matching by KDP crystal".物理学报 65.14(2016).
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[刘崇]的文章
[季来林]的文章
[朱宝强]的文章
百度学术
百度学术中相似的文章
[刘崇]的文章
[季来林]的文章
[朱宝强]的文章
必应学术
必应学术中相似的文章
[刘崇]的文章
[季来林]的文章
[朱宝强]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。